Gate Valves Manufacturer – Industrial Gate Valves

Gate valves are linear-motion isolation valves.

About our gate valves

Gate valves are linear-motion isolation valves. A wedge or parallel gate moves at right angles to the flow to fully open or fully close the line. When fully open, the gate is withdrawn from the flow path, giving a straight-through bore with low pressure drop. UTC VALVES manufactures and supplies gate valves for on/off isolation duty in process, pipeline and utility services.

Cast steel gate valve supplied by UTC VALVES
Product image: UTC VALVES

Product specifications

Cast steel gate valve

Cast steel gate valve
Product image: UTC VALVES
Body material WCB / WC6 / LCB / CF8 / CF8M / CF3 / CF3M etc.
Pressure rating Class 150 to 2500
Design standard API 600 / BS 1414 / ASME B16.34
Inspection & testing API 598 / BS EN 12266-1
End connection Flanged / butt weld / RTJ
Operation Handwheel, gear or actuated (pneumatic / electric)
Size range 2″ to 24″
Trim As per requirement
Options Bypass, floor stand, extended stem
Dimensions Face-to-face ASME B16.10; flanges ASME B16.5; butt-weld ends ASME B16.25
Versions IBR / non-IBR (as per UTC VALVES catalogue)
Cast steel gate valve – sectional drawing
Sectional / general arrangement drawing – tap to enlarge.

Dimensions & technical details (mm)

Parameter Class 2″ 3″ 4″ 5″ 6″ 8″ 10″ 12″ 14″ 16″ 18″ 20″ 24″
Face to face (L) 150# 178 203 229 254 267 292 330 356 381 406 432 457 508
300# 216 283 305 381 403 419 457 502 762 838 914 990 1143
600# 292 356 432 508 559 660 787 838 889 991 1092 1194 1397
900# 368 381 457 559 610 737 838 965 1029 1130 1219 1321 –
1500# 368 470 546 673 705 832 991 1130 1257 1384 1537 1664 –
Height (H) approx. 150# 375 470 570 705 790 990 1200 1400 1500 1740 1950 2150 2565
300# 400 500 600 715 850 1025 1260 1450 1580 1790 2100 2250 2654
600# 400 540 635 730 875 1040 1280 1470 1580 1905 2010 2275 3150
900# 445 595 750 765 865 1225 1450 1625 1680 1925 2025 2310 –
1500# 475 600 775 785 925 1250 1525 1725 1750 1950 2125 2310 –
Handwheel dia. (ØW) 150# 200 230 250 280 300 350 450 450 500 500 600 600 686
300# 200 230 250 300 350 400 450 500 500 600 680 680 762
600# 200 250 305 400 450 450 500 600 600 760 760 760 762
900# 300 300 400 450 300* 350* 400* 400* 450* 500* 500* 550* –
1500# 300 300* 300* 300* 350* 350* 400* 400* 450* 500* 550* 550* –
Weight (kg) approx. 150# 21 35 52 35 85 135 205 300 400 520 685 900 1410
300# 25 50 75 50 155 230 350 490 745 950 1300 1640 2460
600# 40 65 115 65 250 410 650 1100 1600 1950 2070 2150 3620
900# 85 125 180 260 310 525 975 1450 1900 2555 3275 3900 –
1500# 110 145 220 320 403 710 1350 2300 3100 3575 4585 5000 –

Material list

No. Part Material (ASTM specification)
1 Body WCB / WC6 / WC9 / CF8 / CF8M / CF3 / CF3M / LCB
2 Bonnet WCB / WC6 / WC9 / CF8 / CF8M / CF3 / CF3M / LCB
3 Wedge WCB / WC6 / WC9 / CF8 / CF8M / CF3 / CF3M / LCB
4 Stem SS 410 / SS 304 / SS 304L / SS 316L
5 Seat ring SS 410 / SS 304 / SS 304L / SS 316L
6 Back seat bush SS 410 / SS 304 / SS 304L / SS 316L
7 Gland SS 410 / SS 304 / SS 304L / SS 316L
8 Gland flange WCB / WC6 / WC9 / CF8 / CF8M / CF3 / CF3M / LCB
9 Stem nut A439 Gr. D2 / Al Bronze
10 Lock nut Carbon Steel / SS 304
11 Gland packing Graphoil / Graphite Asbestos / PTFE
12 Bonnet gasket Spiral Wound SS 304 with Graphoil or Asbestos / Octagonal Ring
13 Gland eye bolt & nut Carbon Steel / Stainless Steel
14 Bonnet stud B7 / B7M / B8M / B8 / L7
15 Bonnet nut 2H / 8 / 8M / 7
16 Grub screw Carbon Steel
17 Handwheel Carbon Steel
18 Handwheel nut Carbon Steel

How it works

Turning the handwheel (or gear/actuator) drives the stem, which raises or lowers the gate between two seats. Line pressure pushes the gate against the downstream seat to create the seal. Gate valves are designed for fully open or fully closed service; partly open gates are exposed to high-velocity flow that can cause vibration and seat erosion.

Types and configurations

  • Solid wedge – simple, robust design for general service
  • Flexible wedge – accommodates seat distortion from thermal or piping loads, reducing the risk of sticking
  • Split wedge / parallel slide – two-piece gates for specific sealing and thermal conditions
  • Rising stem, outside screw & yoke (OS&Y) – stem position shows valve status
  • Non-rising stem – for installations with limited height
  • Bolted bonnet, welded bonnet and pressure seal bonnet constructions

Construction and design features

  • Full-bore, straight-through flow path when open
  • Backseat arrangement that allows packing maintenance under defined conditions (design-dependent)
  • Renewable or hard-faced seat rings, depending on design
  • Handwheel, gear operator or actuator mounting options
  • Yoke-mounted stem nut for smooth operation

Materials of construction

  • Cast carbon steel (e.g. ASTM A216 WCB, a commonly specified grade)
  • Cast stainless steel (e.g. ASTM A351 CF8M)
  • Low-temperature carbon steel (e.g. ASTM A352 LCB/LCC)
  • Chrome-moly alloy steel (e.g. ASTM A217 WC6/WC9) for high-temperature service
  • Trim options such as 13Cr stainless or hard-faced seats

Material grades listed are those commonly specified in industry for this valve type. Availability of each grade is subject to confirmation by UTC VALVES for every enquiry.

End connections

  • Flanged – raised face (RF) or ring-type joint (RTJ), commonly to ASME B16.5 / B16.47
  • Butt-weld ends, commonly to ASME B16.25
  • Socket-weld or threaded ends on small sizes

Pressure classes and standards

Pressure classes offered by UTC VALVES: listed for each model in the product specifications below.

Standards commonly referenced for this valve type include API 600 (steel gate valves), API 603 (corrosion-resistant bolted bonnet gate valves), ASME B16.34 (pressure–temperature ratings), ASME B16.10 (face-to-face) and API 598 (inspection and testing). These are industry references; they do not indicate that UTC VALVES or its products hold certification. Compliance documents are provided per order where available.

Industrial applications

  • Pipeline and manifold isolation
  • Tank farm inlet and outlet lines
  • Steam, condensate and boiler auxiliary lines
  • Cooling water and fire water headers
  • Hydrocarbon process isolation

Industries served

  • Oil & gas
  • Refining & petrochemicals
  • Power generation
  • Water & wastewater
  • Chemical processing

See all industries we serve

Information to include in your enquiry

A complete enquiry helps us respond with an accurate offer for gate valves:

  • Valve type and configuration
  • Nominal size (NPS / DN)
  • Pressure class or rating
  • Body, trim and seat materials
  • End connection and facing
  • Operator: lever, handwheel, gear or actuator
  • Service fluid, design pressure and temperature
  • Applicable standard or project specification
  • Quantity and required delivery date
  • Inspection, testing and documentation requirements (e.g. material test certificates, third-party inspection)

Gate Valves: frequently asked questions

Can a gate valve be used to throttle flow?

No. Gate valves are intended for fully open or fully closed service. Throttling causes high-velocity flow under the gate, which can lead to vibration, noise and seat damage. For flow regulation, consider a globe valve.

What is the difference between a solid wedge and a flexible wedge?

A solid wedge is a single rigid piece suited to general service. A flexible wedge has a cut around its perimeter so it can flex slightly, which helps it seat properly when the valve body is distorted by temperature changes or pipe loads.

Which details should I include in a gate valve enquiry?

Size, pressure class, body and trim material, end connection, operator type, service fluid, design temperature and the applicable design standard or project specification.

Request a quote for gate valves

Send your specification, datasheet or bill of materials. Our team reviews every enquiry and responds with availability and a quotation.

Request a Quote

WhatsApp us